Our last work day at Lone Star Yogi in Waller, Tx was Tuesday 8/12. We took a couple of days to get packed up and to get a hitch installed on or Ford Edge. Friday morning 8/15, we pulled out and said Good Bye! to Yogi Bear. Our first stop was my brother’s place in Burton, TX for a few days R&R and to get our dining room cabinet finished and moved into the RV. The cabinet project started off as a standard 60″x24″ sink cabinet from Lowe’s. That was too deep for our need so I reduced the depth of the cabinet to fit our space.
Then I had to cut a slot in the faux drawer in the center of the cabinet for our table to slide into the cabinet. Plus reconfigure the two side drawers to fit the 16″ depth. Add a top and place a trim edge that would keep stuff from rolling off when we are on the road. And add a shelf on the inside.
My brother helped me get it into the motor home. After removing the day/night shades and crappy valances, here is where she stood when we left Burton.
I still have to alter the legs on the table and hang new roller shades and curtains on the windows.
Monday AM we pulled away from Burton and headed for Corpus Christi. We stopped in Schulenberg for lunch and fuel. As we approached Corpus Christi, we encountered strong southerly winds and a little rain. Fueled up again in Corpus Christi so we would not need to do that when we leave in a week. We pulled into Colonia Del Rey and got our assigned space. No shade here so it will be hot in the afternoon. Our daughter planned supper for us, so as soon as we got set up, we headed to her apartment.
Tuesday we spent the day with our grandson, Gage. This was his last day of summer vacation. Carol washed clothes while Gage and I played a couple of board games. He and I made a couple of trips back to the RV park so we could walk our fur babies, Cody and MeiLing. After a great TexMex meal at Acapulco. Next, Carol and I headed to Lowe’s to get the new roller shades.
Wednesday after breakfast, I got worked on installing the new shades. It took a little trial and error but they work fine. There are two different roller shade hanging brackets. The ones in front are standard and place the center of the roller about 1″ away from the wall. The ones in the back place the center of the roller about 1.5″ away from the wall. Unless you have them made, most roller shades come in standard 74″ length. Big box stores (Lowe’s, Home Depot, Menard’s, etc.) can cut the roller shades to width. We opted to go that route instead of custom ordering for width and length. We had to get longer brackets to keep the shades from dragging on the RV’s window frames. We also opted to get the room darkening shades instead of those that let in a little light. They really make a difference on blocking heat. The day/night shades we had sorta work but not as well as the shades we installed.
Carol made curtains for the windows last summer when we where at Mark Twain Landing in Monroe City, MO. We are using standard curtain rods. This makes mounting a little tricky because the rods are mounted close to the overhead cabinets.
Here is the final photo of the cabinet in place with new legs to support the table and the new curtains. Sometimes it is the little thing that make a drab RV feel more like home.
We are still thinking through the process of replacing the carpet with laminate flooring. Until we do this, we still need to vacuum the carpet. Our 3-year-old trusty Dirt Devil finally broke down. We wanted something like the Dyson Canister but could not see spending almost $500 for a vacuum. So we went to Walmart and got a Shark Navigator instead at 1/3 the cost. I vacuumed the carpet 3. First pass got all the dog hair from Cody, second and third pass got the dust/dirt that was in the carpet. I can honestly say the Shark really sucks – in a good way. And it is easy to empty and clean the canister.
While on the subject of RV mods, we purchased a solar screen for our windshield. We have seen many motor homes with these solar screens and decide if we were going to survive Texas heat in August, we need one. The solar screen blocks the sun and allows us to still see out. RV Sunscreen out of Winter Haven, Florida make these shades along with other products for RVs. They come in all sizes and color configurations. Plus they ship fast. We got our just before leaving Lone Star Yogi in Waller. We will order some for our side windows when we get settled.
Meanwhile, thanks for stopping by – y’all come back now.